Hướng dẫn cấu hình RAID cho Dell PERC H710

Cập nhật: 09:28 Ngày 15/05/2018

Hướng dẫn cấu hình RAID cho Dell PERC H710

Máy chủ và Giải pháp sẽ hướng dẫn bạn cách cấu hình RAID cho máy chủ Dell chạy card raid PERC H710.

The steps below will guide you through the process of setting up a RAID array on your Dell PERC H710 controller.

  1. Make sure you have physical or console access to the server you wish to create the array on.Dell BIOS at CTRL-R prompt.
  2. Press CTRL-R when prompted to by the BIOS to enter the RAID configuration utility.Dell H710 Configuration Utility.
  3. Highlight the root element of tree that appears on the screen and press F2.Dell H710 Configuration Utility.
  4. Press enter on the “Create new VD” option which will bring you to the configuration screen for new virtual disks.PERC H710 virtual disk configuration menu.
  5. Press enter and select the desired RAID level. Only RAID levels the system supports will be available for selection. For basic redundancy with two drives we recommend RAID-1, for more drives we reccomend RAID-5. If you only want one disk in the array select RAID-0.Selecting a RAID level.
  6. Press tab to move the selector into the disk selection block and press space to select or deselect drives. Disk selection menu.Disk selection menu with two disks selected.
  7. When you have selected the maximum amount of drives the interface will prevent you from adding more drives to the array.
  8. Press tab to move the cursor to the “OK” and hit enter to create your virtual drive.Disk selection menu with OK selected.Alert recommending that new virtual disks be initialized.
  9. Select the newly created virtual disk in the tree and press F2.
  10. Virtual disk operations menu
  11. Move the cursor over the “Initialize” button and press the right arrow key to expose a submenu.Virtual disk initialization submenu
  12. Select the “Fast init” option and select yes when the warning about data loss is displayed.Warning that initialization will destroy data on the virtual disk.Initialization complete message
  13. The virtual disk is now ready, you can now leave the RAID configuration utility or create another array if you have any remaining disks. Press escape to exit.Are you sure you want to exit?Press Control+Alt+Delete to reboot.
Chúc các bạn thành công!
Cần hỗ trợ thêm, bạn vui lòng liên hệ: 024-36.833.666 (202) hoặc số hotline: 0981.359.358